Product and Business News

  • {3}

    {1} {2}

    {4}

    Keep Reading
    {0}
  • Solidstate Controls DVS Power Conditioner
    AMETEK Solidstate Controls Announces DVS Power Conditioner

    Wednesday, December 6, 2017 5 days ago

    AMETEK Solidstate Controls, a leader in industrial power inverters and uninterruptible power supplies,, has introduced a Digital Voltage Stabilizer (DVS) power conditioner designed to work in the most-extreme environmental conditions and capable of single- or three-phase conditioning to conserve energy.

    Keep Reading
  • AEM Boeing 737 Stabilizer Trim Actuator
    AEM Adds Stabilizer Trim Actuator Capability

    Monday, December 4, 2017 7 days ago

    AEM Limited, a unit of AMETEK Aerospace & Defense, now has new capability to test, repair and overhaul the stabilizer trim actuator for the Boeing 737 Classic and Boeing 737 Next Generation (NG) series aircraft platforms at its Ramsgate, Kent facility.

    Keep Reading
  • Creaform Headquarters Exterior
    Creaform Inaugurates New HQ

    Friday, December 1, 2017 10 days ago

    Creaform, a leader in 3-D measurement solutions and engineering services, officially opened its new factory headquarters at Innoparc Lévis in Lévis, Quebec..

    Keep Reading
  • MaryBeth OLear Powervar Marketing Manager
    AMETEK Powervar Names OLear Marketing Manager

    Tuesday, November 28, 2017 13 days ago

    AMETEK Powervar, a leading supplier of uninterruptible power manager (UPM) solutions, has named MaryBeth O’Lear as Marketing Manager.

    Keep Reading
  • JofraCloud Remote Calibration
    New JofraCloud Remote Calibration Saves Time and Improves Safety

    Monday, November 13, 2017 28 days ago

    AMETEK Sensors, Test and Calibration has developed a new way to perform remote reading and setting of its JOFRA™ RTC and PTC Series temperature calibrators. A 3G Gateway unit with transmission coverage equal to a smartphone can now be attached to any JOFRA RTC or PTC calibrator and read data every two seconds.

    Keep Reading
  • Configurable FlexSys ATE Systems Minimize Development Costs, Test Times and Production Floor Footprints

    Thursday, November 9, 2017 32 days ago

    AMETEK Engineered Solutions Group, the power and automated test solutions unit of AMETEK Programmable Power, today introduced its first scalable, integrated test and measurement systems designed for use in medium- to high-mix production environments.

    Keep Reading
  • Power Instruments TR 3000 Multifunction Recorder
    AMETEK Introduces TR-3000 Next-Generation Transient Fault Recorder

    Thursday, November 9, 2017 32 days ago

    AMETEK Power Instruments, a leader in transient fault and disturbance recorders for electrical utilities, has released the TR-3000 Multi-Function Recorder. The TR-3000 has the most-comprehensive triggering and recording functions to ensure users they will never miss a power system anomaly.

    Keep Reading
  • Fine Tubes Nadcap Accreditation
    New Nadcap Accreditation for Fluid Distribution Systems Is Fifth for Fine Tubes

    Friday, November 3, 2017 38 days ago

    Fine Tubes, a leading manufacturer of high-performance tubing, has secured Nadcap accreditation for Fluid Distribution Systems. This is in addition to accreditations it already holds for Heat Treating, Non-Destructive Testing, Fusion Welding and Chemical Processing.

    Keep Reading
  • Creaform VXelements Software
    Creaform Releases 6.1 Version of VXelements 3D Software Platform and Application Suite

    Friday, November 3, 2017 38 days ago

    Creaform, a world leader in portable 3D measurement solutions and engineering services, has released VXelements 6.1, the latest version of its 3D software platform and application suite that includes VXmodel and VXinspect.

    Keep Reading
  • Creaform wins 2017 Good Design Award in Japan

    Thursday, November 2, 2017 39 days ago

    Lévis, Québec —Creaform, a worldwide leader in portable and highly accurate 3D measurement solutions, announced today that it has won the 2017 Good Design Award in Japan for its optical CMM solution and 3D scanners, which include MetraSCAN 3D, HandyPROBE Next and C-Track.

    Keep Reading
  • Process Instruments WellPro Process Mass Spectrometer
    AMETEK WellPro Mass Spectrometer for Drilling Fluid Applications

    Monday, October 30, 2017 42 days ago

    The new WellPro process mass spectrometer from AMETEK Energy & Process Instrumentation provides near real-time quantitative analysis of C1 through C7 components of mud gas in less than 10 seconds. Along with C1 through C7 components, additional analysis components are available.

    Keep Reading
  • Creaform SmartDENT 3D analysis
    Creaform Launches SmartDENT 3D Aircraft Surface Inspection Software

    Tuesday, October 24, 2017 48 days ago

    Creaform, a leader in portable and highly accurate 3D measurement solutions, has launched its aircraft surface inspection software for non-destructive testing (NDT) designed especially for aerospace applications.

    Keep Reading
  • LAND NIR Borescope
    Air Liquide Selects AMETEK Land Thermal Imaging Technology

    Thursday, October 19, 2017 53 days ago

    AMETEK Land, a leader in infrared non-contact temperature measurement, has supplied its Near Infrared Borescope (NIR-B) 3XR, an enhanced thermal imager, to the world leader in gases, technologies and services for industry and health, Air Liquide, which is now gaining know-how about its steam methane reformers.

    Keep Reading
  • EDAX NPAR
    EDAX Granted Patent for NPAR Routine

    Wednesday, October 18, 2017 54 days ago

    EDAX Inc., a business unit of AMETEK Materials Analysis Division, has been granted a U.S. patent for the technology that underlies its NPAR Electron Backscatter Diffraction (EBSD) routine in EDAX’s TEAM and OIM Analysis software packages.

    Keep Reading
  • Cessna Denali Cargo Door Motor
    Cessna Selects AMETEK for Denali Cargo Door Motor

    Monday, October 9, 2017 63 days ago

    Power and Data Systems (PDS) business unit of AMETEK Aerospace & Defense has been selected by the Cessna Aircraft Company to provide the Cargo Door Motor for the Denali high-performance, single-engine turboprop. The Cargo Door Motor developed by AMETEK supports Cessna’s goal of providing the largest aft cargo door in this market.

    Keep Reading
  • AMETEK Actuator for Cessna Turboprop
    AMETEK Showcases Cessna Programs at NBAA

    Monday, October 9, 2017 63 days ago

    Among the products showcased by the Power and Data Systems business unit of AMETEK Aerospace & Defense at NBAA-BACE 2017 are two recent product development programs with the Cessna Aircraft Company for its Cessna Denali high-performance, single-engine turboprop.

    Keep Reading
  • AMETEK Power and Data Systems Atlanta Regional Office
    AMETEK Opens Southeast Sales Office in Atlanta

    Monday, October 9, 2017 63 days ago

    Power and Data Systems business unit of AMETEK Aerospace & Defense has opened a new sales office for the Southeastern United States at the Cobb County International Airport (KRYY), Kennesaw, GA.

    Keep Reading
  • AEM Testek Hydraulic Test Stand
    AEM Invests in High-Pressure, High-Flow Hydraulic Test Stand

    Monday, October 9, 2017 63 days ago

    AEM Limited, a unit of AMETEK Aerospace & Defense, has installed a new semi-automated Testek hydraulic test stand at its Ramsgate, Kent, facility in the United Kingdom. The hydraulic test station offers AEM a wide-ranging capability to test a variety of hydraulic units, including pumps, motors, transfer units, valves, controls, actuators, servo valves, servo actuators and flight controls.

    Keep Reading
  • Lloyd Instruments LD Series Universal Tester for Wood
    Lloyd Instruments Adds New Testers for Wood and Timber Testing

    Wednesday, October 4, 2017 68 days ago

    Lloyd Instruments has introduced five new, cost-effective machines to its line of universal test machines for materials testing. These powerful universal test machines are especially suited for testing wood and timber. Applications include the testing of cork, furniture, laminated board, plywood, veneer sheets and wooden containers.

    Keep Reading
  • MOCON AQUATRAN Model 3 Instrument
    AMETEK MOCON Launches AQUATRAN Model 3 Water Vapor Instrument

    Wednesday, October 4, 2017 68 days ago

    AMETEK MOCON, a leading global provider of instruments and services for testing, measuring and analyzing invisible gases, has launched a new system to measure the water vapor transmission rate (WVTR) of ultra high barrier materials.

    Keep Reading