Foreign Language News

  • {3}

    {1} {2}


    Keep Reading
  • Solidstate Controls DVS Power Conditioner
    AMETEK Solidstate Controls Announces DVS Power Conditioner

    Wednesday, December 6, 2017 5 days ago

    AMETEK Solidstate Controls, a leader in industrial power inverters and uninterruptible power supplies,, has introduced a Digital Voltage Stabilizer (DVS) power conditioner designed to work in the most-extreme environmental conditions and capable of single- or three-phase conditioning to conserve energy.

    Keep Reading
  • AEM Boeing 737 Stabilizer Trim Actuator
    AEM Adds Stabilizer Trim Actuator Capability

    Monday, December 4, 2017 7 days ago

    AEM Limited, a unit of AMETEK Aerospace & Defense, now has new capability to test, repair and overhaul the stabilizer trim actuator for the Boeing 737 Classic and Boeing 737 Next Generation (NG) series aircraft platforms at its Ramsgate, Kent facility.

    Keep Reading
  • Creaform Headquarters Exterior
    Creaform Inaugurates New HQ

    Friday, December 1, 2017 10 days ago

    Creaform, a leader in 3-D measurement solutions and engineering services, officially opened its new factory headquarters at Innoparc Lévis in Lévis, Quebec..

    Keep Reading
  • MaryBeth OLear Powervar Marketing Manager
    AMETEK Powervar Names OLear Marketing Manager

    Tuesday, November 28, 2017 13 days ago

    AMETEK Powervar, a leading supplier of uninterruptible power manager (UPM) solutions, has named MaryBeth O’Lear as Marketing Manager.

    Keep Reading
  • JofraCloud Remote Calibration
    New JofraCloud Remote Calibration Saves Time and Improves Safety

    Monday, November 13, 2017 28 days ago

    AMETEK Sensors, Test and Calibration has developed a new way to perform remote reading and setting of its JOFRA™ RTC and PTC Series temperature calibrators. A 3G Gateway unit with transmission coverage equal to a smartphone can now be attached to any JOFRA RTC or PTC calibrator and read data every two seconds.

    Keep Reading
  • AMETEK Declares Quarterly Dividend of Nine Cents Per Share

    Friday, November 10, 2017 31 days ago

    BERWYN, PA, NOVEMBER 10, 2017 – The Board of Directors of AMETEK, Inc. (NYSE: AME) declared a regular quarterly dividend of nine cents per share for the fourth quarter ending December 31, 2017.

    Keep Reading
  • Configurable FlexSys ATE Systems Minimize Development Costs, Test Times and Production Floor Footprints

    Thursday, November 9, 2017 32 days ago

    AMETEK Engineered Solutions Group, the power and automated test solutions unit of AMETEK Programmable Power, today introduced its first scalable, integrated test and measurement systems designed for use in medium- to high-mix production environments.

    Keep Reading
  • Power Instruments TR 3000 Multifunction Recorder
    AMETEK Introduces TR-3000 Next-Generation Transient Fault Recorder

    Thursday, November 9, 2017 32 days ago

    AMETEK Power Instruments, a leader in transient fault and disturbance recorders for electrical utilities, has released the TR-3000 Multi-Function Recorder. The TR-3000 has the most-comprehensive triggering and recording functions to ensure users they will never miss a power system anomaly.

    Keep Reading
  • Fine Tubes Nadcap Accreditation
    New Nadcap Accreditation for Fluid Distribution Systems Is Fifth for Fine Tubes

    Friday, November 3, 2017 38 days ago

    Fine Tubes, a leading manufacturer of high-performance tubing, has secured Nadcap accreditation for Fluid Distribution Systems. This is in addition to accreditations it already holds for Heat Treating, Non-Destructive Testing, Fusion Welding and Chemical Processing.

    Keep Reading
  • Creaform VXelements Software
    Creaform Releases 6.1 Version of VXelements 3D Software Platform and Application Suite

    Friday, November 3, 2017 38 days ago

    Creaform, a world leader in portable 3D measurement solutions and engineering services, has released VXelements 6.1, the latest version of its 3D software platform and application suite that includes VXmodel and VXinspect.

    Keep Reading

    Friday, November 3, 2017 38 days ago

    BERWYN, PA, NOVEMBER 3, 2017 – AMETEK, Inc. (NYSE: AME) will present at Baird’s 2017 Global Industrial Conference on Tuesday, November 7, 2017

    Keep Reading
  • Creaform wins 2017 Good Design Award in Japan

    Thursday, November 2, 2017 39 days ago

    Lévis, Québec —Creaform, a worldwide leader in portable and highly accurate 3D measurement solutions, announced today that it has won the 2017 Good Design Award in Japan for its optical CMM solution and 3D scanners, which include MetraSCAN 3D, HandyPROBE Next and C-Track.

    Keep Reading
  • AMETEK Announces Record Third Quarter 2017 Results and Raises Full Year 2017 Guidance

    Thursday, November 2, 2017 39 days ago

    AMETEK’s third quarter 2017 sales were a record $1.08 billion, an increase of 15% compared to the third quarter of 2016. Operating income increased 16% to $232.8 million versus the prior year and operating margins were 21.5%, up 20 basis points compared to the same period last year. Diluted earnings per share were a record $0.66, an 18% increase compared to the third quarter of 2016. Orders were up 16% in the quarter.

    Keep Reading
  • Process Instruments WellPro Process Mass Spectrometer
    AMETEK WellPro Mass Spectrometer for Drilling Fluid Applications

    Monday, October 30, 2017 42 days ago

    The new WellPro process mass spectrometer from AMETEK Energy & Process Instrumentation provides near real-time quantitative analysis of C1 through C7 components of mud gas in less than 10 seconds. Along with C1 through C7 components, additional analysis components are available.

    Keep Reading
  • Creaform SmartDENT 3D analysis
    Creaform Launches SmartDENT 3D Aircraft Surface Inspection Software

    Tuesday, October 24, 2017 48 days ago

    Creaform, a leader in portable and highly accurate 3D measurement solutions, has launched its aircraft surface inspection software for non-destructive testing (NDT) designed especially for aerospace applications.

    Keep Reading
  • LAND NIR Borescope
    Air Liquide Selects AMETEK Land Thermal Imaging Technology

    Thursday, October 19, 2017 53 days ago

    AMETEK Land, a leader in infrared non-contact temperature measurement, has supplied its Near Infrared Borescope (NIR-B) 3XR, an enhanced thermal imager, to the world leader in gases, technologies and services for industry and health, Air Liquide, which is now gaining know-how about its steam methane reformers.

    Keep Reading
    EDAX Granted Patent for NPAR Routine

    Wednesday, October 18, 2017 54 days ago

    EDAX Inc., a business unit of AMETEK Materials Analysis Division, has been granted a U.S. patent for the technology that underlies its NPAR Electron Backscatter Diffraction (EBSD) routine in EDAX’s TEAM and OIM Analysis software packages.

    Keep Reading
  • AMETEK Announces Third Quarter 2017 Earnings Release and Webcasted Investor Conference Call Information

    Thursday, October 12, 2017 60 days ago

    AMETEK will webcast its third quarter 2017 investor conference call on Thursday, November 2, 2017, beginning at 8:30 AM ET. The live audio webcast can be accessed by clicking on the Investor Communications link in the “Investors” section of A replay of the call will also be archived on the website and will be available until the next quarterly earnings call.

    Keep Reading
  • Cessna Denali Cargo Door Motor
    Cessna Selects AMETEK for Denali Cargo Door Motor

    Monday, October 9, 2017 63 days ago

    Power and Data Systems (PDS) business unit of AMETEK Aerospace & Defense has been selected by the Cessna Aircraft Company to provide the Cargo Door Motor for the Denali high-performance, single-engine turboprop. The Cargo Door Motor developed by AMETEK supports Cessna’s goal of providing the largest aft cargo door in this market.

    Keep Reading
  • AMETEK Actuator for Cessna Turboprop
    AMETEK Showcases Cessna Programs at NBAA

    Monday, October 9, 2017 63 days ago

    Among the products showcased by the Power and Data Systems business unit of AMETEK Aerospace & Defense at NBAA-BACE 2017 are two recent product development programs with the Cessna Aircraft Company for its Cessna Denali high-performance, single-engine turboprop.

    Keep Reading